Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献   

Surficial fractures in the Navajo sandstone,south-western USA: the roles of thermal cycles,rainstorms, granular disintegration,and iterative cracking     

David B. Loope  Garrison R. Loope  Caroline M. Burberry  Clinton M. Rowe  Gerald C. Bryant 《地球表面变化过程与地形》2020,45(9):2063-2077

Deep (> 5 m) sheeting fractures in the Navajo sandstone are evident at numerous sites in southern Utah and derive from tectonic stresses. Strong diurnal thermal cycles are, however, the likely triggers for shallow (< 0.3 m) sheeting fractures. Data from subsurface thermal sensors reveal that large temperature differences between sensors at 2 and 15 cm depth on clear summer afternoons are as great as those that trigger sheeting fractures in exposed California granite. Extensive polygonal patterns in the Navajo sandstone are composed of surface-perpendicular fractures and were produced by contractile stresses. Numerous studies have shown that porewater diminishes the tensile strength of sandstone. Based on our thermal records, we propose that cooling during monsoonal rainstorms triggers polygonal fracturing of temporarily weakened rock. On steep outcrops, polygonal patterns are rectilinear and orthogonal, with T-vertices. Lower-angle slopes host hexagonal patterns (defined by the dominance of Y-vertices). Intermediate patterns with rectangles and hexagons of similar scale are common. We posit that outcropping fractures are advancing downward by iterative steps, and that hexagons on sandstone surfaces (like prismatic columns of basalt) have evolved from ancestral orthogonal polygons of similar scale. In lava flows, fractures elongate intermittently as they follow a steep thermal gradient (the source of stress) as it rapidly moves through the rock mass. In our model, a steep, surficial thermal gradient descends through unfractured sandstone, but at the slow pace of granular disintegration. Through time, as the friable rock on stable slopes erodes, iterative cracking advances into new space. Hexagonal patterns form as new fractures, imperfectly guided by the older ones, propagate in new directions, and vertices drift into a configuration that minimizes the ratio of fracture length to polygon area. © 2020 John Wiley & Sons, Ltd.  相似文献   

一种云端一体化的土地督察遥感监测方法     

孙久虎 《测绘通报》2020,(3):129-133

针对目前土地遥感监测工作中存在的监测频次低和数据现势性差等问题，通过统筹获取国产卫星影像数据提升监测频次，设计了多源遥感影像的空间网格组织和调度方法，改变传统的影像切片发布模式，建立实时影像服务方法，大幅提升了土地督察遥感监测时效。通过在国家土地督察济南局试点应用，研发了云端一体化的土地督察遥感监测服务平台，实践证明基于空间网格的影像组织管理效率优于传统金字塔切片管理模式，有效支撑了违法用地、永久基本农田保护和城市开发边界突破等监测预警，应用成效显著。  相似文献   

不同测站点云数据的配准算法     

高益忠 《北京测绘》2020,(2):180-184

随着三维激光扫描技术的发展,利用三维激光扫描仪采集信息,构建三维模型成为了热门的课题。由于受到观测环境、观测方向等影响,无法一次性地获得物体的所有的点云数据。因此,不同视角下点云数据的配准成为了三维建模中的关键技术,直接影响了最终的重合结果以及模型精度。本文着重研究主方向贴合法和最近点迭代算法(ICP算法),基于matlab平台编写算法,并对算法进行研究,得出配准结果以及配准精度。  相似文献   

A-FPN算法及其在遥感图像船舶检测中的应用     

于野  艾华  贺小军  于树海  钟兴  朱瑞飞 《遥感学报》2020,24(2):107-115

光学遥感图像船舶检测主要面临两个挑战:光学遥感图像背景复杂,船舶检测易受海浪、云雾及陆地建筑等多方面干扰;遥感图像分辨率低,船舶目标小,对于其分类与定位带来很大困难;针对上述问题,在FPN的基础上,提出一种融入显著性特征的卷积神经网络模型A-FPN (Attention-Based Feature Pyramid Networks)。首先,利用卷积提取图像特征金字塔;然后,利用顶层金字塔逐级构建显著特征层,抑制背景信息,通过金字塔顶层的细粒度特征提高浅层特征的表达能力,构建自上而下的多级显著特征映射结构;最后利用Softmax分类器进行多层级船舶检测。A-FPN模型利用显著性机制引导不同感受下的特征进行融合,提高了模型的分辨能力,对遥感图像处理领域具有重要应用价值。实验阶段,利用公开的遥感目标检测数据集NWPU VHR-10中的船舶样本进行测试,准确率为92.8%,表明A-FPN模型适用于遥感图像船舶检测。  相似文献   

内点最大化与冗余点控制的无人机遥感图像配准     

余蕊  陈玮扬  杨扬  杨昆  罗毅 《遥感学报》2020,24(11):1325-1341

利用小型无人机进行遥感图像配准在自然灾害损害评估、环境监测和目标检测与追踪等领域发挥着至关重要的作用，但小型无人机的图像采集过程容易受风速/风向、复杂地形、电池容量、飞行姿态、飞行高度等自然或人为因素的影响。这些问题通常会导致捕捉到的场景重叠率低与图像非刚性畸变，在特征点提取过程中产生大量冗余点，增加了图像配准的难度。本文提出一种基于特征点的小型无人机图像配准方法，该方法的核心思想是在配准过程中识别冗余点，同时最大化可用内点数量。所识别的冗余点当作控制点，用于控制网格代图像的运动。最后通过最大化内点和合理移动控制点来恢复图像变换。本文使用50对小型无人机图像进行特征匹配和图像配准的实验，其中平均配准精度可达80.38%，并且本文方法在所有的情况下都优于5种当前流行算法。  相似文献   

河北省怀安县朱家洼矿区地球化学特征与找矿方向     

王占彬 《地质与勘探》2020,56(1):102-112

河北怀安朱家洼矿区位于华北板块北缘中段太古宙、元古宙、中生代金银铅锌铁硫铁矿成矿带,为火山热液型金多金属矿。为查明该区成矿规律,明确找矿方向,在区内开展了水系沉积物测量、土壤地球化学测量等工作。通过对元素分布、元素相关性、元素异常等特征研究表明,Au、Mo为本区主成矿元素;各元素异常平面分布具有分带性,高温元素W、Sn、Bi异常位于骆驼山火山机构中心,中低温元素Pb、Zn、As、Ag等异常分布于火山机构边部及周边围岩中,成矿元素Au、Mo异常主要位于火山机构西侧围岩中。异常查证发现金钼矿化体2条,金钼矿化受火山机构和北西向构造带控制。依据成矿地质条件、地球化学异常及查证成果认为,朱家洼矿区Au、Mo成矿潜力大,火山机构西侧围岩区是该区重点找矿地段。  相似文献   

渤海自由生活海洋线虫两个新纪录种     

赵丽萍  乔春艳  陆洋  孙静 《海洋与湖沼》2020,51(1):212-217

在对渤海滨州贝壳堤岛的自由生活海洋线虫进行分类和多样性研究中,发现2个我国新纪录种并进行了描述。其中,澳洲深咽线虫Bathylaimus australis Cobb,1894主要特征为:头刚毛长约20μm,分为4节,顶端膨大;前口腔大,无齿,后口腔小,具小齿;化感器双环形,位于口腔中部位置;交接刺细长,稍向腹面弯曲,近端膨大呈头状,长32-37μm;引带宽大,肾形,长36-40μm,末端角质化,渐尖。古氏努朵拉线虫Nudora gourbaultae Vincx,1989主要特征为:体表具12列纵向排列的V型装饰;第二体环较宽,头刚毛11-15μm(为头颈的67%-81%);化感器圆形,直径4-6μm(为相应体径的29%-38%),位于第二体环上;具双咽球;交接刺细长,弯曲呈S型,长为肛径的1.3-1.5倍;引带等于或长于交接刺,镰刀型,无肛前辅器。  相似文献   

守初心耕海探洋七十载担使命披风踏浪砥砺行——中国科学院海洋研究所70年发展纪实   总被引：1，自引：0，他引：1  

王凡  孙松 《海洋与湖沼》2020,51(4):664-672

中国科学院海洋研究所是新中国第一个专门从事海洋科学研究的国立科研机构,她的70年光辉历程是我国海洋科技事业从无到有、从弱到强的发展缩影,是新中国海洋科学调查研究自主创新发展历程的真实写照。本文简要介绍中国科学院海洋研究所的主要发展历程,回顾70年来取得的主要科技成就,并围绕新形势下建设海洋大科学研究中心等改革发展举措,讨论和展望研究所的未来发展。  相似文献   

Meio-epifaunal wood colonization in the vicinity of methane seeps     

Adriana Gracia C.  Lisa A. Levin  Sven Zea 《Marine Ecology》2020,41(1):e12573

In deep-sea environments, plant remains of several origins are found, including branches, twigs, leaves, and wood pieces, among others. As most of the deep-sea bottoms are oligotrophic and nutrient-limited, plant remains provide an oasis of localized organic enrichment and a substrate for colonization. Sunken wood was suggested to play an important evolutionary role in the diversification of chemosynthetic ecosystems, possibly representing stepping stones for the colonization between vent and seep ecosystems. In order to understand colonization processes of the Pacific Costa Rican meio-epifaunal assemblages associated with sunken wood, a field experiment was conducted on Mound 12 (8°55.778′N, 84°18.730′W) at ~1,000 m water depth. Woodblocks were placed in four different habitats (Mussel beds, tube worms, near mussel beds, rubble bottoms), and different local environmental conditions (seepage-active and seepage-inactive sites). Seven experimental Douglas fir woodblocks (each 1,047 cm² in surface area) were deployed from the R/V Atlantis using the manned submersible Alvin in February 2009 and recovered after 10.5 months in January 2010. Sample processing and analyses led to a data set of abundance (total 9,951 individuals) and spatial distribution of nine meio-epifaunal higher taxa/groups. Meio-epifaunal densities on individual woodblocks ranged from 3 to 26 ind.10 cm². Copepods accounted for the highest abundances (75.1%), followed by nauplii larvae (11.7%) and nematodes (9.8%). The maximum number of individuals (26.3 ind.10 cm⁻²) was found in blocks placed in seepage-inactive areas (near active mussel beds) in contrast to 2.9 ind.10 cm⁻² in active areas (within a mussel bed). A hierarchical cluster analysis grouped blocks according to seepage activity and not to habitat, but tests of similarity showed no significant differences in higher taxon composition and abundances, probably owing either to substrate homogeneity or low sample size. Copepods were the most abundant representatives, suggesting that this group is one of the most successful in colonizing in the early stage of succession, in this case while hardwood substrates are not yet decomposed or bored by bivalves.  相似文献